Introduction FSS-IMU618 is a 6-DOF MEMS Inertial Sensor module made by Forsense.
Volume 23.7 x 23.7 x 9.9mm
Weight 10g
Application field Automatic driving,Precision measurement,Stable platform,Automatic control
Product features High precision, High resolution,Temperature compensation and Independent calibration
Software interface I²C、SPI、Serial port、CAN
Hardware interface 2x10 Double rows of pins
86-15148215714
DetailTechnical IndexDownloadHardware and Structu

1、Product Description

FSS-IMU618-C is a MEMS inertial measurement unit (IMU) module with 6 degrees of freedom (DOF) developed by Forsense (Shanghai) Technology Co., Ltd.


It features 3-axis Gyroscopes and 3-axis Accelerometers, measuring angular velocity, linear acceleration, and high-precision attitude angles respectively.


High precision and high resolution combine to help capture subtle vibration and tilt. A large number of output parameters enable the perception of motion despite intense shaking. All IMU modules are calibrated independently on a rotary table and adjusted precisely over an ultra-wide temperature range in a temperature chamber before leaving the factory, so that they can deliver stable and consistent performance in most extreme conditions.


Applications

Autonomous Driving: Vehicle-mounted, Robot, Engineering Vehicle, Underwater.
Precision Measurement: Underground, Tunnel, Vibration, Inclination.
Stable Platforms: Pan-Tilt, Mobile SATCOM with Stable Platform.
Navigation and Control: Auto-Control System, Fixed-Wing Drone


2、Characteristic

Tactical Grade MEMS Gyroscope

Bias Instability: 1.1°/hr

Angle Random Walk: 0.09°/√hr

Temperature Drift: 0.1°/s (-40℃ ~ 85℃, ≤1℃/min @1σ)


Tactical Grade MEMS Accelerometer

Bias Instability: 15μg

Velocity Random Walk: 0.015 m/s/√hr

Temperature Drift: 1.5mg (-40 ~ 85℃, ≤1℃/min @1σ)


Refined temperature compensation

Wide Temperature Range: -40℃ to 85℃

Precise Temperature Calibration


Independent Rotary Table Calibration

Sensitivity, Bias instability, and Misalignment


High-intensity Tolerance

Ultra Shock Resistance: 2000g(0.5ms, Half-sine shock pulse, 3 axis)

Superb Vibration Resistance: 10g(10~2KHz, 3-axis)

Ultra-wide Operating Temperature Range: -40℃ to 85℃

100% Magnetic Shielding


Benefits

Real-time and Flexibility: Configurable output sampling rate up to 1KHz

Digital Interfaces: Serial ports, I²C and SPI

Small Size and Low Weight: 23.7×23.7×9.9 mm, about 10g


Apart from standard performance and output parameters, Forsense also provides customized services, including software development and LOGO design, to improve your products!

Key Indicators of Gyroscope

ParametersTest Conditions / RemarksTyp.Unit
Measurement Range
±500°/s
Bias instability@25℃, Allan Variance, 1σ

1.1

°/hr
Bias stabilityGJB, 10s smoothing4°/hr
Bias Repeatability
GJB16°/hr
Resolution
0.062°/s
Misalignment
0.02deg
Internal Low-pass Cutoff FrequencyAdjustable Software47Hz
ODR
1000Hz
Measure Delay
7.0ms
Offset Error over Temperature

-40℃~85℃,

≤1℃/min@1σ

0.1°/s
Random Walk@25℃, Allan Variance, 1σ0.09°/√hr
Scale Coefficient Error
2.0
Scale Factor Nonlinear
200ppm

Key Indicators of Accelerometer

ParametersTest Conditions / RemarksTyp.Unit
Measurement Range
±8g
Bias instability@25℃, Allan Variance, 1σ15μg
Bias stabilityGJB, 10s smoothing35μg
Bias RepeatabilityGJB0.15mg
Resolution
0.0863mg
Misalignment
0.02deg
Internal Low-pass Cutoff FrequencyAdjustable Software47Hz
ODR
1000Hz
Measure Delay
7ms
Offset Error over Temperature

-40℃~85℃,

≤1℃/min@1σ

1.5

mg
Random Walk@25℃, Allan Variance, 1σ0.015m/s/√hr
Scale Coefficient Error
0.5
Scale Factor Nonlinear
200ppm


FSS-IMU618_V1.0-221013


Mechanical Dimensions (unit: mm)
ch2 图4 IMU 测量中心位置.jpg

   ♦ Product classification

   ♦ Contact Us

Telephone:86-15148215714   
E-MAIL     :yang_fan@forsense.cn   
Position    :Room 4F,Building 16,No. 1000 JinhaiRoad, City of Elite,,Pudong New Area,Shanghai   




Facebook图标.png
9556001aae3a9404d7bc67e2d0b6b2ea.jpg速卖通图标.png
江总 WhatsApp 二维码.png
FacebooktwitterSample purchaseWhatsApp